MICROMVG Image Release History
	Version	Release Date		Changes
	6.09.17	6/29/2021		1. Added Gross/Mass/Energy Flow Units Options
				2. Added Delay Time between Slave Poll
				3. Added GC Variable 1x32 or 2x16 Selection
				4. Added ISO6976-2016 Heating Value (Gross)
				5. Supported Different Ranges of Foxboro Sensor
	6.09.16	10/10/2019		1. Corrected Analog Inputs Expension Initialization
	6.09.15	5/30/2018		1. Reset Turbine Offset at Startup
	6.09.14	5/18/2018		1. Increased Timer for A/D Converter (Analog Inputs)
	6.09.13	2/23/2018		1. Modified Foxboro Transmitter Interface Routine
	6.09.12	6/6/2017		1. Reduced Time for A/D Converter
	6.09.11	7/14/2016		1. Added Averaged Heating Value
				2. Log Heating Value Overriding Changes to Audit Trail Report
	6.09.10	12/29/2015		1. Added Calorific Value
	6.09.09	7/1/2015		1. Added Foxboro Transmitter Interface
	6.09.08	9/9/2013		1. Corrected Analog Input#3 Reading
	6.09.07	5/6/2013		1. Set Less Sensitivity Default Value for the Display Keys
				2. Correction - Densitometer Temperature Maintenance Value (Audit Trail Report)
	6.09.06	3/12/2013		1. Modified Communication Routine
				2. Reduced Sdevice Timer
				3. Set Display Contrast Initialization to 35
				4. Set Double Write to Download Mode via RS232 Port
				5. Set Modbus Register <2611> to 1 for 2x16 bits Gas Chromatograph IEEE Float
	6.09.05	9/14/2012		1. Correction - Flow Averaged Routine (AGA7 - Mass Pulses Input)
	6.09.04	3/31/2010		1. Modified Reset Routine
				2. Correction - Printed Reports
				3. Correction - Stack DP
	6.09.03	1/29/2010		1. Added Rosemount Meter Type
	6.09.02	10/12/2009		1. Included FPV in the Wedge Meter Equation for Gas Application
	6.09.01	9/16/2009		1. Modified Display Initialization
	6.09.00	3/20/2009		1. Added Support for Old and New Hardware Units
	6.08.20	9/9/2008		1. Added Modbus Registers 9397,9399 for Meter#1/#2 Mass Flow Rate in LB
				2. Added Scale Variabes 3036 and 3028 (2 Decimal Inferred)
	6.08.19	8/25/2008		1. Added Scale Value Selection
	6.08.18	3/26/2008		1. Correction - Standard Steam Calculation
	6.08.17	1/31/2008		1. New Rosemount Average Routine
	6.08.16	2/26/2007		1. Added NIST10 Superheated Steam
				2. Added Yesterday Day and Last Hour Registers
	6.08.15	1/8/2007		1. Modify Display Sensitivity Key Routine
	6.08.14	11/28/2006		1. Added Floating Point Shift Registers
				2. Added Analog Input Expansion Option
	6.08.13	11/9/2005		1. Added Day Flow Time in Minutes
	6.08.12	10/5/2005		1. Added Proving Function
	6.08.11	6/23/2005		1. Increase the Range of Saturated Steam Table
	6.08.10	4/26/2005		1. Add PID Pressure Base
				2. Add Daylight Saving Time Option
				3. Add Multi.Variable Communication Status
	6.08.9	11/30/2004		1. Modify Modbus Shift Routine
				2. Added Battery Voltage Reading
				3. Enable/Disable Front Panel Scan Key
				4. Enable/Disable Display Backlight Function
				5. Correction - V-Cone Y Factor
				6. Added Calibration Parameters to be Part of the Configuration Software
	6.08.8	9/17/2004		1. Increased the Range of Saturated Steam Table
				2. Synchronize the System Clock and Realtime Clock
	6.08.6	6/15/2004		1. Added New Modbus Shift Range (8001-8451)
	6.08.5	6/8/2004		1. Increased Stack
				2. Correction - Frequency Input - Mass Pulse FWA Routine
	6.08.4	4/20/2004		1. Correction - Broadcast Command
	6.08.3	4/15/2004		1. Correction - Analog Ouput - Reverse Flow Rate
	6.08.2	3/26/2004		1. Added Yesterday's Data Modbus Registers (8381-8435)
	6.08.1	10/27/2003		1. Set ROM Wait State to 1
	6.08.0	10/7/2003		1. Correction - Analog Output #2,#3,#4
				2. Correction - Modbus Registers 1801-1846
	6.07.9	9/19/2003		1. Correction - RS232 Communication (Version 6.07.8 only)
	6.07.8	9/8/2003		1. Reset Multi.Variable if Multi.Var. Communication is Lost
				2. Set RAM Wait State to 1
	6.07.7	11/15/2002		1. Normalize AGA8 Composition Percentage. (Acceptable Data Range 98-102)
	6.07.6	10/3/2002		1. Correction - Steam Entropy Calculation
	6.07.5	9/6/2002		1. Incrased DP Range of Multi-Variable to 1075
	6.07.4	8/26/2002		1. Correction - Analog Input Jumping
	6.07.3	3/15/2002		1. Disable Calibrate Mode - Mass Flow Rate Data Entry
	6.07.2	1/23/2002		1. Revised AGA8 Routine
	6.07.1	1/3/2002		1. Set Wait State to 2
	6.07.0	10/17/2001		1. Correction - RTD Calibration
	6.06.9	8/20/2001		1. Correction - Analog Output Maximum
	6.06.8	7/17/2001		1. Revised Communication Routine
	6.06.7	7/10/2001		1. Correction - Analog Output Drop
	6.06.6	6/10/2001		1. Correction - RTD Reading (Increase RTD Gain)
	6.06.5	5/8/2001		1. Disable Analog Output if Calibration Is Set
	6.06.4	4/23/2001		1. Correction - Density.b Calculation (AGA8 Gross Method#1/#2)
				2. Add New Modbus Registers - Analog Output#3/#4
	6.06.1	4/15/2001		1. Added PID Control Routine
	6.06.0	4/5/2001		1. Added Analog Output #1-#4 Routine
	6.05.3	3/23/2001		1. Increased Sensitive Factor Value
	6.05.2	3/16/2001		1. Added New Data Entry - FA Override (V-Cone Calculation)
	6.05.1	2/7/2001		1. Swap Status Input/Switch Output #1/#4 Setting
	6.05.0	11/23/2000		1. Revised Multi-Variable Interface Routine
	6.04.0	10/23/2000		1. Added More Resolution to Totalizer
	6.03.4	10/10/2000		1. Correction - Switch Outputs and Alarms
	6.03.3	10/6/2000		1. Correction - Spare Data Alarms
				2. Set Data Ready Flag After Retrieving Historical Data
	6.03.2	9/22/2000		1. Correction - Multi-Variable Calibration
	6.03.1	9/5/2000		1. Correction - Analog Output Default
	6.03.0	8/21/2000		1. Add Calibration
				2. Correction - Display Contrast
	6.02.0	8/12/2000		1. Added Modem Function
	6.01.0	8/4/2000		1. Correction - Calibration Mode